GoJak Master Set with Storage Rack

Description

Each dolly will lift up to 1574 lbs., Features oversize casters for easier rolling, A must have when pulling cars up flatbed trucks, Kit includes two RH jacks, two LH jacks, and mobile rolling storage rack, Underframe clearance is increased an additional 2-1/2 inches over the 5000 Series
GoJak Master Set with Storage Rack
Sku # 9108568
Mfr. Part # 9108568
Condition
New
Brand
GoJak
Sold
Kit
Details
Info
It's a real pain to move around a race or old car in your shop. They are hard to move by yourself, or you have to get out a floor jack, lift each end and put dollies under each wheel. These GoJaks simply slide in from the side and jack up each wheel using just your foot. This allows you to handle the job fast and by yourself.
Easily position locked, blocked, or disabled vehicles with the GoJak Vehicle Positioning Jack Dolly. Use it in your shop, parking garage, or on a tow call. The American-Made GoJak 6313 and 6313L are absolute workhorses rated for vehicle curb weights up to 6,300 lbs. and tire widths up to 13 inches. Features include high strength galvanized steel rollers, upgraded 1-3/4" wide axles, and heavy-duty nylon, double-ball bearing raceway casters. This set up makes for smooth rolling under heavier loads. The GoJak 6313 and 6313L also have a 5-degree offset pedal for additional foot-to-tire clearance when jacking. Equipped with the largest casters in the GoJak product line allows for increased ground clearance, especially useful when pulling cars up a flatbed.
This kit includes two of the “left hand” versions, which are useful if the car is disabled and the front tire is turned at an extreme angle. The foot pedal on the “left hand” GoJak is oriented to point out of the wheel well in this situation.
This kit also includes a convenient storage cart that can handle all four GoJaks®. The cart loads and unloads in seconds and rolls easily to the job or storage area. The new design allows ANY model or variation of GoJaks® to fit uniformly on the cart. This newly designed rounded top also provides a better fit and makes for a smoother removal of GoJaks® off the cart. Upgraded TPR Rubber Tread Caster with thicker 1/2-13 stem means fewer failures while under load.
Designed, Manufactured, Tested and Proven in the USA since 1984. The Original Self-Loading Wheel Dolly, GoJak® is the only way to roll!
For tires up to 13" wide, 36" tall
Lifts 1574 lbs. each
Oversize casters for easier rolling
Underframe clearance is increased an additional 2-1/2 inches over the 5000 Series
Very useful when pulling cars up flatbed trucks.
Includes all hardware and instructions
Lifetime warranty on steel frame
Kit Includes:
(2) GoJak G6313 RH Jacks
(2) GoJak G6313L LH Jacks
(1) GoJak G567R Mobile Rolling Storage Rack
Specs
Sold in Quantity
Set
Color
Purple
Reviews
great product should have bought before trying cheaper produ
Rated
by old guy on June 11, 2021
Summary:
Perfect for my needs can move the car myself without assistance. I'm in my seventies and lack the strength and endurance I had 50 years ago
Pros:
I can load and move the car without assistance
Yes, I recommend this product.
Yes
Rated
by Gunner on June 09, 2021
Summary:
I was a little disappointed with the casters if you have all the wheels facing the same direction they work fine . I had a friend make me up a tool to spin the wheels in the direction that I need to move vehicle . I oiled and greased the bearings up real good also did not make much of a difference. I am using them to move a 2008 ext cab 61/2 bed Silverado in my shop on nice concrete floors.
Gojak work well for moving my vehicle
Rated
by Stewart on April 27, 2021
Summary:
Works well for moving my vehicle. Easy to use.
Yes, I recommend this product.
Work well but a little pricey
Rated
by Paul on April 07, 2021
Summary:
Work well but a little pricey
Yes, I recommend this product.
Expensive, but well built and work flawlessly
Rated
by Layla 2017 on March 29, 2021
Summary:
Using them to move two cars around a garage. Cars need to spin 90 degrees to open up area, there is no learning curve to using these because they work well enough to be self explanatory
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.